hit counter script

Adding Memory - Dell Precision 420 User Manual

Hide thumbs Also See for Precision 420:
Table of Contents

Advertisement

2. If you have a mini tower chassis, remove the AGP card brace according to the instructions in
(Mini Tower Chassis
Only)."
3. If necessary, disconnect any cables connected to the card.
4. Unscrew the mounting bracket of the card you want to remove.
5. Grasp the card by its outside corners, and ease it out of its connector.
6. If you are not replacing the card, install a metal filler bracket over the empty card-slot opening.
NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain Federal Communications Commission
(FCC) certification of the system. The brackets also keep dust and dirt out of your computer.
7. If you have a mini tower chassis, replace the AGP card brace.
8. Replace the computer cover, and reconnect your computer and peripherals to their electrical outlets and turn them on.
NOTE: After you remove and replace the cover, the chassis intrusion detector causes the following message to be displayed at
the next system start-up:
ALERT! Cover was previously removed.
9. To reset the chassis intrusion detector, enter the
NOTE: If a setup password has been assigned by someone else, contact your network administrator for information on resetting
the chassis intrusion detector.

Adding Memory

Dell Precision 420 systems support dual direct Rambus dynamic random-access memory (RDRAM) channels. The channels are designated A
and B. Dell Precision 420 systems support Rambus in-line memory modules (RIMMs) in 64-, 128-, 256-, and 512-megabyte (MB) capacities. The
RIMMs feature error checking and correction (ECC).
Dell Precision 420 systems support a maximum of four RIMMs for up to 2 gigabytes (GB) of total memory.
Figure 6 shows the RIMMs and RIMM sockets.
Figure 6. RIMMs and RIMM Sockets
RIMM Installation Guidelines
When you add system memory, you must install RIMMs in matched pairs (pairs of identical capacity). If only one pair of RIMMs is installed, they
must occupy slots RIMMB_1 and RIMMA_2, and you must install continuity RIMMs (C-RIMMs) in sockets RIMMB_3 and RIMMA_4.
Tables 1 lists sample memory configurations.
Table 1. Sample RIMM Configuration Options
Total
Desired
Memory
2048 MB
1024 MB
1024 MB
512 MB
System Setup program
1 Socket RIMMB_1
2 Socket RIMMA_2
3 Socket RIMMB_3
4 Socket RIMMA_4
RIMMB_1
RIMMA_2
512 MB
512 MB
512 MB
512 MB
256 MB
256 MB
128 MB
128 MB
"Removing and Replacing the AGP Card Brace
and reset Chassis Intrusion to Enabled or Enabled-Silent.
RIMM Socket
RIMMB_3
512 MB
C-RIMM
256 MB
128 MB
RIMMA_4
512 MB
C-RIMM
256 MB
128 MB

Advertisement

Table of Contents
loading

Table of Contents