[J-10] Setting the Energy-saving Mode
You can reduce power consumption of the printer efficiently by using a sleep mode or by shutting down the printer when
it is not used for a certain time.
Sleep Mode
You can configure the printer to enter the sleep mode when data is not sent from the computer or when the
printer status remains as it is longer than the specified time.
Auto Shutdown
You can configure the printer to shut down when the specified time is elapsed after entering the sleep
mode.
IMPORTANT
Power consumption when the power is off (when the power switch is not pressed)
Even if the power of the printer is turned off, power is consumed only slightly while the power
plug is inserted into the AC power outlet. To cut the power consumption completely, unplug the
power plug from the AC power outlet.
Sleep Mode
You can specify the settings for sleep mode using the following procedure.
IMPORTANT
Printing immediately after the sleep mode is released
During the sleep mode, calibration or correction of "Out-of-Register Colors" is not performed
automatically.
If you cannot obtain appropriate printout results when printing immediately after the sleep mode