Messages Regarding Printing Or Adjustment; Use Another Paper - Canon imagePROGRAF iPF9000S User Manual
Hide thumbs
Also See for imagePROGRAF iPF9000S:
- Troubleshooting manual (191 pages) ,
- Brochure (8 pages) ,
- User manual (807 pages)
Table of Contents
Advertisement
Messages regarding printing or adjustment
Use another paper.
The Printhead and feed amount cannot be adjusted
when highly transparent lm is loaded.
Cannot execute this command. Use other paper.
The loaded paper cannot be used for color calibration. Load paper compatible with color calibration. (*1)
*1: Always make sure the loaded paper matches the media type setting on the printer. Adjustment cannot
be completed correctly unless the setting value matches the loaded paper.
Cannot print as specied.
Lift the release lever and replace paper with A4/LTR (vertical) or larger
Cause
The loaded paper is too small.
Lift the release lever and replace roll with 10 in. wide or larger roll
Cause
The loaded paper is too small.
Cannot adjust band.
The Printhead nozzles are clogged.
Highly transparent lm is loaded that cannot be used
for feed amount adjustment.
Cause
Cause
Cause
Messages regarding printing or adjustment
We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.677)
Adjust the feed amount manually.
(→P.685)
See "Paper Reference Guide."
(→P.108)
Corrective Action
Switch to paper A4/Letter (vertical) or larger.
Corrective Action
Load a roll 10 inches wide or larger.
Follow the steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.717)
2.
Clean the Printhead if the nozzles are clogged.
(→P.718)
Adjust the feed amount manually.
(→P.685)
Corrective Action
Corrective Action
Corrective Action
Error Message 795
Advertisement
Table of Contents
