System Configuration
Serial Port
SATA Operation
USB Controller
SMART Reporting
Diskette Drive
Miscellaneous Devices
Keyboard illumination
Downloaded from LpManual.com Manuals
Default Setting: AT
Allows you to configure the integrated serial port. The options are:
•
Disabled
•
COM1
•
COM2
•
COM3
•
COM4
Default Setting: COM1
Allows you to configure the internal SATA hard-drive controller. The options are:
•
Disabled
•
ATA
•
AHCI
Default Setting: AHCI
NOTE: SATA is configured to support RAID mode.
Allows you to control the USB controller. The options are:
•
Enable USB Controller
•
Diasabe USB Mass Storage Dev
•
Disable USB Controller
Default Setting: Enable USB Controller
Allows you to activate the Self Monitoring Analysis and Reporting Technology
(SMART).
Default Setting: Disabled
Allows you to activate the diskette drives. The options are:
•
Disabled
•
Enabled
Default Setting: Disabled
Allows you to enable or disable the following devices:
•
Internal Modem
•
Fixed Bay
•
eSATA Ports
•
Hard Drive Free Fall Protection
•
External USB Port
•
Microphone
•
Camera
You can also enable or disable Media Card and 1394 together.
Default Setting: All devices are enabled.
Allows you to configure the keyboard illumination feature. The options are:
103