1 M2.5 x 5-mm screws (4)
19. Starting at the top of the panel, remove the silver inlay from around the LCD panel by carefully prying it loose.
20. On the rails that hold the LCD panel to the display, remove four M2 x 3-mm screws from the left rail, four M2 x 3-mm
screws from the right rail, and two M2 x 3-mm screws from the bottom rail.
NOTE:
Do not remove the screws that hold the display latches in place.
1
M2 x 3-mm screws (10)
21. Carefully raise the LCD panel a few inches, and disconnect the cable underneath the panel by pulling up on the blue
pull tab.
2 M2.5-mm shoulder screws (12)
2
3 silver display inlay
LCD panel
3
rails