Table of Contents
Advertisement
RM-272; RM-273
BB Troubleshooting and Manual Tuning Guide
Visual defects (pixel)
Item
1
Defect counts
2
Combined
defect counts
Steps
1. Verify with a working display that the fault is not on the display module itself.
The display module cannot be repaired.
2. Check that the cellular engine is working normally.
i
To check the functionality, connect the phone to a docking station.
Phoenix service software.
ii Start
iii Read the phone information to check that also the application engine is functioning normally (you
should be able to read the APE ID).
3. Proceed to the display troubleshooting flowcharts.
Use the Display Test tool in
Issue 1
Table 7 Pixel defects
White dot defect
R
G
1
1
Not allowed.
Two single dot defects that are within 5 mm of each other should be
interpreted as combined dot defect.
Phoenix to find the detailed fault mode.
COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
Pixel defects can be checked by controlling the
display with Phoenix. Use both colours, black and
white, on a full screen.
The display may have some random pixel defects
that are acceptable for this type of display. The
criteria when pixel defects are regarded as a display
failure, resulting in a replacement of the display, are
presented the following table.
B
White Dot
Total
1
1
Black dot
Total
defect
1
1
Page 3 –21
- Quick Links:
- Display and Keypad Features
- Hardware Features
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
