Table of Contents
Advertisement
Nokia Customer Care
3. Click Start and Tune.
4. Setup the signal generator to correspond the values in the "RX AGC Calibration" pop-up window and click OK:
Frequency:
Level:
Modulation:
Deviation:
Modulation frequency:
5. Check that the "Rx Chain" value in "Tuning Results" is within the limits presented in the following table.
RX chain
Low freq
High freq
i If the Rx gain is acceptable, click Yes to save the results to the phone.
6. To close the tuning window, click Close.
Page 7–46
Min
-6
1.5 3.5
-5
-0.7 4.0
-5
-0.7 4.0
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
RF Troubleshooting and Manual Tuning Guide
2141MHz
–51 dBm + cable and adapter attenuations
FM
500 kHz
50 kHz
Typ
Max
Unit
6
dB
5
5
RM-36
Issue 1
Advertisement
Chapters
Table of Contents
Troubleshooting
