Nokia Customer Care
Page 4–8
PCS-1
The PCS-1 power cable (DC) is used with a docking station, a module jig
or a control unit to supply a controlled operating voltage.
PKD-1
SW security device is a piece of hardware enabling the use of the service
software when connected to the parallel (LPT) port of the PC.
Without the device, it is not possible to use the service software.
Printer or any such device can be connected to the PC through the device
if needed.
Because the WCDMA network disturbs the RX side testing of the WCDMA
phone and the Tx signal of the WCDMA phone can severely disturb the
WCDMA network, a shield box is needed in all testing, tuning and fault
finding which requires WCDMA RF signal.
The shield box is not an active device, it contains only passive filtering
components for RF attenuation.
RJ-56
RJ-56 is a rework jig used with ST-21.
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
Service Tools and Service Concepts
Power cable
SW security device
RF shield box
Rework jig
RM-36
Issue 1