4. Press the end key to return to the standby mode and enter the phone number,
including any prefix (such as 0 or 1) that your calling card may require when
you make a calling card call. See your calling card for instructions.
5. Press and hold the call key for a few seconds until
6. When you hear the tone or system message, select OK.
■ Phone settings
Select
Menu
>
Settings
>
Phone settings
Language—Select a language for the display texts.
Automatic keyguard
—Select
On
select OK. You can set the time from 10 seconds to 60 minutes. To deactivate the
automatic keyguard, select Off. It may be possible to dial the emergency number
programmed into your device when the keyguard is on.
Touch
tones—Select the tones that sound when you press the keys on your
keypad:
Touch tone length
or
Manual touch
Start-up
tone—Switch the tone
switched on.
Welcome
note—Enter a message that will be shown briefly on the display when
the device is switched on.
Banner—Set the device to display the operator logo (Default) or your own
message (Customize) when the device is in the idle state. This is a
carrier-dependent feature.
■ Security settings
Your device uses codes to help prevent unauthorized use:
The security code protects your phone from unauthorized outgoing calls or
unauthorized access to information stored in the device. The preset code
is 12345.
When security features that restrict calls are in use (such as call restriction), calls
still may be possible to the official emergency number programmed into your
device.
Select
Menu
>
Settings
>
Security settings
Call
restrictions—Lets you restrict incoming and outgoing calls.
Security
level—Not sure what this does. TBD
Card call
is displayed.
and one of the following:
when
Set delay:
appears, enter the time, and
tones.
On
or
Off
that sounds when the device is
and one of the following:
S e t t i n g s
33