Table of Contents
Advertisement
Convention
E
Next steps
1.
Install the IDSDM.
2.
If removed, install the SD cards.
3.
Follow the procedure listed in the After working inside your system section.
Related links
Removing an optional internal SD card
Installing an optional internal SD card
Installing the optional internal dual SD module
Installing the optional internal dual SD module
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
NOTE: Temporarily label each SD card with its corresponding slot before removal.
Steps
1.
Locate the internal dual SD module (IDSDM) connector on the system board. To locate the IDSDM connector, see the System
board connectors section.
2.
Align the IDSDM with the connector on the system board.
3.
Push the IDSDM until it is firmly seated on the system board.
Figure 71. Installing the optional internal dual SD module
1.
IDSDM
3.
IDSDM connector
108
IDSDM indicator code
Not lit
Description
Indicates that the card is missing or is booting.
2.
pull tab
- Quick Links:
- Memory Specifications
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
