Table of Contents
Advertisement
COPIER > FUNCTION > MISC-P
BB
Toner forcible eject (black band)
Lv.1 Details
Forcibly discharge low-charge toner, and send it to the drum cleaner
unit.
The operation automatically stops after execution.
Use case
When operating the machine in low-duty and high-humidity
environment for a long period of time (implemented by the
administrator)
Adj/set/operate method Select the item and press the OK key.
Display/adjust/set range During operation: ACTIVE, When operation finished normally: OK,
When operation failed: NG
Required time
60 seconds
USBH-PRT
Output of USB device information report
Lv.1 Details
To output information of the connected USB device in the form of a
report.
Adj/set/operate method Select the item, and then press OK key.
DV-RT
Idle rotation of Developing Assembly
Lv.1 Details
To execute idle rotation of the Developing Assembly.
Duration can be set by COPIER> OPTION> IMG-DEV>DV-RT-LG.
Use case
When small vertical lines occurs on an image
Adj/set/operate method Select the item, and then press OK key.
Caution
If using frequently, deterioration of developer or toner scattering
might occur.
Display/adj/set range
During operation: ACTIVE, At normal termination: OK, At abnormal
termination: NG
Default value
0
Related service mode
COPIER> OPTION> IMG-DEV>DV-RT-LG
8
Service Mode > COPIER > FUNCTION > SENS-ADJ
T-8-50
8
Service Mode > COPIER > FUNCTION > SENS-ADJ
■ SENS-ADJ
COPIER > FUNCTION > SENS-ADJ
STCK-LMT
Adj of Shift Tray Full Sensor position
Lv.2 Details
To adjust position of the Shift Tray Full Sensor (front)/(rear).
"ON" is displayed at detection of full, and "OFF" is displayed at other
times.
Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range
At detection of full: ON, At other times: OFF
8-113
T-8-51
8-113
Advertisement
Table of Contents
Troubleshooting
