2
Technology > Updater > Enabling UGW Link
5. Press [Yes] button.
Obtain the download file information for communication test from the distribution server
(to execute the communication test to the distribution server).
Using the download file information for communication test, the contents for test are
downloaded from the file server (for the communication test to the file server).
6. Upon the communication test completed, the communication test result screen is shown.
Press [OK] button to exit this operation.
2
Technology > Updater > Enabling UGW Link
Enabling UGW Link
When installing the firmware in the method of "UGW-linked Download and Update" or "UGW-
linked Download", the following should be set before actually using UGW link.
Service Technician
Sales Company's HQ
NOTE:
•
See "imageWARE Remote Operator's Manual / e-Maintenance Business Operation
Manual" for how to operate UGW WebPortal.
•
[Distribute Firmware] should be set on [Customer Management] screen for staff in charge
F-2-366
of setting for [Enter customer information] or [Command for firmware distribution] in order
to allow them to select the desired device on [Firmware Distribution Information] screen.
•
If [Distribute Firmware] is not shown on [Customer Management] screen of UGW
WebPortal, appropriate authorities may not be set to each account in Firmware
Distribution Information. Contact the Sales Company HQ concerned for confirmation.
F-2-367
Setting of Device
COPIER >OPTION >FNC-SW >CDS-UGW
Service Mode
(0 -> 1)
(Level 1)
Setting of UGW
In [Customer Management] screen, set [Do not
WebPortal
distribute firmware] to [Distribute firmware].
See "Analysis>Firmware Distribution
Setting of Authorities on
Information" to grant the appropriate authorities
UGW WebPortal
to each account.
2-249
2-249