Table of Contents
Advertisement
1
Product Overview > Features > Service Features > Applying New Connectors
■ Applying New Connectors
Newly-configured connectors are used as some connectors on each controller PCB.
● Purpose
To prevent the communication error caused by the following:
• Loose/removed connector due to vibration during transportation
• Half-inserted connector at the time of servicing
● Features
• Easy to hold because the overall height of the housing is high
• Connector can be inserted with less force.
• Lever lock mechanism is available. Proper insertion can be determined by the sound ("snap")
or clicky feeling
Points to Caution when Inserting/Removing the Connector:
Be sure to keep the following in mind during work:
• While releasing the lever lock of the housing, hold the housing to remove. Do not
hold and pull the harness.
• Be sure to insert the connector while the housing is positioned straight to the socket.
Do not tilt the housing to insert the connector.
1
Product Overview > Features > Service Features > Applying New Connectors
F-1-12
1-10
1-10
Advertisement
Table of Contents
Troubleshooting
