Drive Specifications; Drives; Optical Drive; Ports And Connectors Specifications - Dell EMC PowerEdge T440 Installation And Service Manual
Hide thumbs
Also See for EMC PowerEdge T440:
- Installation and service manual (115 pages) ,
- Simple operation manual (9 pages) ,
- Manual (150 pages)
Table of Contents
Advertisement
Drive specifications
Drives
The PowerEdge T440 system supports:
•
Up to 4 x 3.5 inch cabled drives with drive adapter, internal, SATA, or Nearline SAS drives
or
•
Up to 8 x 3.5 inch hot swappable drives with drive adapter, internal, hot swappable SAS/SATA drives
or
•
Up to 16 x 2.5 inch hot swappable drives with drive adapter, internal, hot swappable SAS/SATA drives
Optical drive
The T440 system supports one optional slim SATA DVD-ROM drive or DVD +/-RW drive.
Ports and connectors specifications
USB ports
The table provides information about the supported USB port specifications.
Table 17. USB specifications
System
PowerEdge T440
NIC ports
The PowerEdge T440 system supports two Network Interface Controller (NIC) ports on the back panel each with 1 Gbps configuration.
NOTE:
You can install up to six PCIe add-on NIC cards.
VGA ports
The Video Graphic Array (VGA) port enables you to connect the system to a VGA display. The T440 system supports one 15-pin VGA ports
on the back of the system.
Serial connector
The T440 system supports one serial connector on the back panel, which is a 9-pin connector, Data Terminal Equipment (DTE), 16550-
compliant.
Front panel
•
One USB 2.0-compliant port
•
One USB 3.0-compliant port
Back panel
•
Four USB 2.0-compliant rear ports
•
Two USB 3.0-compliant rear ports
Dell EMC PowerEdge T440 Installation and Service Manual
Technical specifications
35
- Quick Links:
- Status Led Indicators
- Status Led Indicators
Hide quick links:
Advertisement
Table of Contents
