Advertisement
Important
• If the Borderless Extension slide bar is set to the far right position, the back of the paper may
come out stained.
6. Complete setting process
Click Print.
If you print now, the document will be printed by filling in the entire surface of the paper.
Important
• The available paper sizes for Borderless Printing are pre-determined. From Paper Size, select the
paper displayed as "Borderless."
• If you want to print borderless using a custom paper size, create a custom paper size by choosing
Paper Size, Manage Custom Sizes..., and setting all Non-Printable Area values to 0 mm. Next,
choose Page Processing, Fit Roll Paper Width and select On (Borderless).
• If you try to set borderless printing, in Page Processing, Banner Printing and Print Centered will be
displayed in gray and you will not be able to configure them.
• Depending on paper size, the length/width ratio of the paper may be different from that of the image,
making it impossible for the whole image to fit on the paper.
When this happens, crop the image with the application software to match paper size.
• When printing borderless, printing may stop abruptly and the paper will be cut causing a slight color
unevenness on the edges of the paper. If you require particularly high quality, under Page Processing,
Automatic Cutting, select None. When you do so, the document will be printed without the left and
right margins. After the printed material has exited the printer and has been cut, cut the upper and lower
edges with a pair of scissors.
• When printing borderless on paper with low ink-fixing properties, depending on frequency of use, the
cutter unit may come into contact with the paper surface scratching it and causing the paper to be
unevenly cut.
587
- Quick Links:
- Online Manual
- List of Support Code for Error
Hide quick links:
Advertisement
Troubleshooting
