Paper Is Not Cut Straight - Canon TX-2000 Online Manual

Hide thumbs Also See for TX-2000:

Paper is not cut straight

Is the edge of the paper cutting position creased?

Straighten out any curling by the edges of the paper.

Is the edge of the paper cutting position lifting up when cutting?

Reload the paper correctly.

Is the paper a type that can be cut with the cutter blade?

Set Cutting mode in the touch screen menu to User cut, then and cut the roll paper with a cutting implement

such as scissors.

Specifying the Cutting Method for Rolls

Are you using the basket or stacker properly?

Make sure that you are using the basket or stacker properly.

Example Basket Configurations

Example Stacker Configurations

Check that the Cut speed setting is correct

Change the Cut speed setting in the touch screen menu.

If the paper edge cannot be cut straight at the cut starting position, it may be improved by selecting slower cut

speed than that selected currently.

If the paper edge cannot be cut straight at the cut ending position, it may be improved by selecting faster cut

speed than that selected currently.

Menu Structure

Did the printing material slip diagonally while being cut?

Set the Cutting mode in the touch screen menu to Eject cut, and then hold and cut the material after it has

Specifying the Cutting Method for Rolls

Is the cutter blade attached properly?

Attach the cutter blade properly.

Replacing the Cutter Blade

Is the edge of the cutter blade blunt?

Show Quick Links