The operating system is unable to carry out the command. The message is usually followed by specific information—for example, Printer out of paper. Take

the appropriate action.

Hard-disk drive configuration error —

The computer cannot identify the drive type. Run the Hard-Disk Drive tests in the Dell Diagnostics. See

Hard-disk drive controller failure 0 —

The hard drive does not respond to commands from the computer. Run the Hard-Disk Drive tests in the Dell Diagnostics. See

Hard-disk drive failure —

The hard drive does not respond to commands from the computer. Run the Hard-Disk Drive tests in the Dell Diagnostics. See

Hard-disk drive read failure —

The hard drive may be defective. Run the Hard-Disk Drive tests in the Dell Diagnostics. See

Insert bootable media —

The operating system is trying to boot to nonbootable media. Insert bootable media.

Invalid configuration information-please run System Setup Program —

The system configuration information does not match the hardware configuration. The message is most likely to occur after a memory module is installed.

Correct the appropriate options in the system setup program. See

Keyboard clock line failure —

Run the Keyboard Controller test in the Dell Diagnostics. See

Keyboard controller failure —

Restart the computer, and avoid touching the keyboard or the mouse during the boot routine. Run the Keyboard Controller test in the Dell Diagnostics. See

Dell

Diagnostics.

Keyboard data line failure —

Run the Keyboard Controller test in the Dell Diagnostics. See

Keyboard stuck key failure —

Restart the computer, and avoid touching the keyboard or keys during the boot routine. Run the Stuck Key test in the Dell Diagnostics. See

Licensed content is not accessible in MediaDirect —

cannot be played. See

Dell MediaDirect

System Setup

Dell

Diagnostics.