Table of Contents
Advertisement
When replacing the separation drive mount 2 and an e-ring, proceed to the step 5).
When replacing the separation drive mount 2, the separation drive 1 and an e-ring, proceed to: A) Steps for replacing the
separation drive mount 2 and the separation drive mount 1.
5) Remove the e-ring [1] and the screws [2][3] to remove the separation drive mount 2.
[Reference] Only a screw [3] is stepped screw. Do not mix up with other screws.
6) Replace the bearing [1] attached to the removed separation drive mount 2 with the new separation drive mount 2.
[Reference] Attach the bearing so that its flange comes to outer side.
7) Reassemble the parts in reverse order from the step 5). To attach the e-ring, prepare and use a new e-ring (XD2-1100-642).
A) Steps for replacing the separation drive mount 2 and the separation drive mount 1.
A-1) Remove the 2 screws [1] and remove the entire units of the separation drive mount 2 and the separation drive mount 1.
131
- Quick Links:
- Error Code
Hide quick links:
Advertisement
Table of Contents
