Solid-State Drive; Removing The Solid-State Drive1 - Dell XPS 15 9500 Service Manual
Hide thumbs
Also See for XPS 15 9500:
- Setup and specifications (22 pages) ,
- Setup and specifications (23 pages)
Table of Contents
Advertisement
Steps
1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly at an angle, into the memory-module slot.
3. Press the memory module down until it clicks into place.
NOTE:
If you do not hear the click, remove the memory module and reinstall it.
NOTE:
Repeat step 1 to step 3 to install the other memory module if available on your computer.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Solid-state drive
Removing the solid-state drive1
Prerequisites
1. Follow the procedure in
CAUTION:
Solid-state drives are fragile. Exercise care when handling the solid-state drive.
CAUTION:
To avoid data loss, do not remove the solid-state drive while the computer is turned on or is in sleep state.
2. Remove the
base
cover.
About this task
The following image indicates the location of the solid-state drive1 and provides a visual representation of the removal procedure.
After working inside your
computer.
Before working inside your
computer.
Removing and installing components
19
Hide quick links:
Advertisement
Table of Contents
