Display Assembly; Removing The Display Assembly - Dell XPS 15 9500 Service Manual
Hide thumbs
Also See for XPS 15 9500:
- Setup and specifications (22 pages) ,
- Setup and specifications (23 pages)
Table of Contents
Advertisement
Steps
1. Place the I/O board on the palm-rest and keyboard assembly.
2. Align the screw hole on the USB Type-C port bracket with the screw hole on the system board.
3. Connect the screw (M2x4) that secures the USB Type-C port bracket to the system board.
NOTE:
Ensure to connect IO marked side of the I/O-board cable to the I/O daughter board and the side marked MB
to the system board.
4. Connect the I/O-board cable to the connector on the system board and I/O board.
Next steps
1. Install the
right
fan.
2. Install the
base
cover.
3. Follow the procedure in
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following images indicate the location of the display assembly cable and display-assembly hinges and provide a visual representation of
the removal procedure.
34
Removing and installing components
After working inside your
computer.
Before working inside your
computer.
Hide quick links:
Advertisement
Table of Contents
