Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Prerequisites
1. Remove the
base
cover.
2. Remove the
wireless
card.
Procedure
1. Peel off the tape that secures the I/O-board cable to the I/O board.
2. Note the routing and remove the I/O-board cable from the routing guides.
3. Peel off the tape that secures the display cable to the display cable connector.
4. Open the latch and disconnect the display cable from the system board.
5. Remove the antenna cable from the routing guide.
6. Remove the four screws (M2.5x5) that secure the display hinges to the palm-rest and keyboard assembly.
Removing the display assembly
computer. After working inside your computer, follow the instructions in
Removing the display assembly
30
After
51
Advertisement
Table of Contents
