Advertisement
Available languages
Available languages
Important Safety Instructions
Please read these "Important Safety Instructions" thoroughly before operating the machine. As these
instructions are intended to prevent injury to the user or other persons or destruction of property, always pay
attention to these instructions. Also, since it may result in unexpected accidents or injuries, do not perform
any operation unless otherwise specified in the manual. Improper operation or use of this machine could
result in personal injury and/or damage requiring extensive repair that may not be covered under your
Limited Warranty.
Installation
WARNING
Never block the ventilation slots and louvers on the
)
machine. These openings are provided for proper
ventilation of working parts inside the machine.
Blocking these openings can cause the machine
to overheat. Never place the machine on a soft
surface, such as a sofa or rug.
Do not install the machine in the following
)
locations:
- A damp or dusty location
- A location near water faucets or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames
Do not install the machine near alcohol, paint
)
thinner, or other flammable substances. If
flammable substances come into contact with
electrical parts inside the machine, it may result in a
fire or electrical shock.
Do not place the following items on the machine. If
)
these items come into contact with a high-voltage
area inside the machine, it may result in a fire or
electrical shock.
If these items are dropped or spilled inside the
machine, immediately turn OFF the main power
switch, and disconnect the power cord from the
power outlet. Then, contact your local authorized
Canon dealer.
- Necklaces and other metal objects
- Cups, vases, flowerpots, and other containers filled
with water or liquids
CAUTION
Do not install the machine in unstable locations, such
as unsteady platforms or inclined floors, or in locations
subject to excessive vibrations, as this may cause the
machine to fall or tip over, resulting in personal injury.
74
Important Safety Instructions
Power Supply
WARNING
Do not damage or modify the power cord. Also,
)
do not place heavy objects on the power cord, or
pull on or excessively bend it, as this could cause
electrical damage and result in a fire or electrical
shock.
Keep the power cord away from a heat source;
)
failure to do this may cause the power cord coating
to melt, resulting in a fire or electrical shock.
Do not connect or disconnect the power cord with
)
wet hands, as this may result in electrical shock.
Do not connect the power cord to a multiplug
)
power strip, as this may cause a fire or electrical
shock.
Do not bundle up or tie the power cord in a knot, as
)
this may result in a fire or electrical shock.
Insert the power plug completely into the power
)
outlet, as failure to do so may result in a fire or
electrical shock.
Do not use power cords other than the power cord
)
provided, as this may result in a fire or electrical
shock.
The provided power cord is intended for use with
)
this machine. Do not connect the power cord to
other devices.
As a general rule, do not use extension cords. Using
)
an extension cord may result in a fire or electrical
shock.
Do not use power supplies with voltages other than
)
those specified herein, as this may result in a fire or
electrical shock.
Always grasp the power plug when disconnecting
)
the power cord. Pulling on the power cord may
expose or snap the core wire, or otherwise damage
the power cord. If the power cord is damaged, this
could cause current to leak, resulting in a fire or
electrical shock.
IMPORTANT
Install this machine near the power outlet and leave
sufficient space around the power plug so that it can
be unplugged easily in an emergency.
Advertisement
Chapters
