Table of Contents
Advertisement
COPIER > OPTION > FNC-SW
REBOOTSW
2
SJB-UNW
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
CARD-RNG
2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
ARCDT-SW
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Related Service Mode
SJOB-CL
1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Supplement/Memo
[Not used]
Reserve upper limit of secured print job
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the upper limit for the number of reserved jobs in secured print job.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 2
0: 50 jobs, 1: 90 jobs, 2: No limit
1
Card number setting (department number)
To set the number of cards (departments) that can be used with the Card Reader.
When setting the number of cards (departments)
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
1 to 1000
1000
ON/OFF of ARCDAT control
To set whether to execute ARCDAT control.
When 1 is set, ARCDAT control is not executed.
If the value displayed in HT-C is erratic when hue variation occurs, set the value of this item to 1
and check the hue. If hue variation is alleviated, analyze the cause of ARCDAT control error
(developer, Patch Sensor, etc.).
When hue variation occurs
Enter the setting value, and then press OK key.
Be sure to set the value back to 0 when ARCDAT control is back to normal.
0 to 1
0: ON, 1: OFF
0
COPIER> DISPLAY> HT-C
Set of scan job canceling by logout
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to cancel the scan job in operation by logout of the user.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
The job with scanning completed cannot be canceled.
0 to 2
0: Cancel only scan job in waiting state, 1: Cancel all scan jobs, 2: Not canceled
0
Scan job: A job after the scanning operation is completed.
904
8. Service Mode
Advertisement
Table of Contents
Troubleshooting
