Canon imageRunner Advance 400iF Starter Manual page 34

Hide thumbs Also See for imageRunner Advance 400iF:

Table of Contents

Press [Set] → enter the unit name → press

[Next].

Setting the Line Type

You can set the phone line type to use for

sending.

You must check the type of telephone line that

you are using, and make the correct setting. If

you set the machine incorrectly, the phone line

cannot be used for communication.

Select the line type → press [OK].

Specifying the System Manager

Settings

You can register the System Manager

Information settings.

Confirm or change the authentication

information → press [Next] → enter information

if necessary → press [OK].

Closing the Setup Guide

You can close the Setup Guide, and then restart

the machine.

After confirming that there are no jobs

currently in progress, press [OK].

You can also configure the machine's settings using

the Setup Guide from [Start Setup Guide] (Settings/

Registration). (See e-Manual > Security.)

Changing Specified Settings

▼

Table of Contents

Imagerunner advance 500if