Table of Contents
Advertisement
Values for the Media Registration
Procedure
Settings front side
[Trapezoid ({0})]
Settings back side
[Trapezoid ({0})]
Ranges
Setting
[Trapezoid ({0})]
Diamond Shape Image
When to do
The diamond shape is perpendicular to the feed direction. You can measure the diamond shape
via the diagonal of the image.
Canon varioPRINT DP line
Values for the Media Registration
What to enter
The image is adjusted in mm (inches).
Measured difference > 0:
• At the bottom of the sheet, the length of the
image in the feed direction decreases.
• The distance between the circles at the bot-
tom of the verification chart decreases.
Measured difference < 0:
• At the top of the sheet, the length of the im-
age in the feed direction decreases.
• The distance between the circles at the top
of the verification chart decreases.
What to enter
The image is adjusted in mm (inches).
Measured difference > 0:
• At the bottom of the sheet, the length of the
image in the feed direction decreases.
• The distance between the dots at the bot-
tom of the verification chart decreases.
Measured difference < 0:
• At the top of the sheet, the length of the im-
age in the feed direction decreases.
• The distance between the dots at the top of
the verification chart decreases.
Range (mm)
-2.5 to +2.5
Chapter 13 - Media Handling
Range (inches)
-0.098 to +0.098
337
- Quick Links:
- Solving Errors
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
