Installing A 2.5-Inch Drive Into A 3.5-Inch Drive Adapter - Dell EMC PowerEdge T440 Installation And Service Manual
Hide thumbs
Also See for EMC PowerEdge T440:
- Installation and service manual (156 pages) ,
- Simple operation manual (9 pages) ,
- Manual (150 pages)
Table of Contents
Advertisement
Figure 33. Removing a 2.5-inch drive from a 3.5-inch drive adapter
Next steps
Install a 2.5-inch drive into a 3.5-inch drive
Installing a 2.5-inch drive into a 3.5-inch drive adapter
Prerequisites
1. Follow the safety guidelines listed in
2.
Remove the 3.5-inch drive adapter from the 3.5-inch hot swappable drive carrier.
Steps
1. Align the screw holes on the 2.5-inch drive with the screw holes on the 3.5-inch drive adapter.
NOTE:
If the hard drive or SSD carrier has Torx screw, use Torx 6 (for 2.5-inch drive) or Torx 8 (for 3.5-inch drive)
screwdriver to install the drive.
2. Using a Phillips #2 screwdriver, secure the 2.5-inch drive to the 3.5-inch drive adapter.
adapter.
Safety
instructions.
Installing and removing system components
45
Advertisement
Table of Contents
