Table of Contents
Advertisement
The following describes the components on the bottom side of the Notebook PC as shown by the
illustration on the previous page.
Hard Disk Drive Compartment
The hard disk drive is secured in a compartment under a metal plate. Hard disk drive upgrades are to be
done by authorized service centers or dealers only.
Reset Button
reset
The reset button is used for shutting down the Notebook PC if <CTRL><ALT><DEL> or turning OFF the
power does not respond. To use this function, momentarily depress the button within the hole with a pen or
paper clip and the Notebook PC will turn OFF. Do not use a pencil since the tip may break off in the hole.
Air Vents
The air vents allow cool air to enter and warm air to exit the Notebook PC. Do not block the air vents or
else overheating may occur!
CPU Compartment
The CPU compartment contains a socket for mounting a central processing unit. CPU installation/
upgrades must be done by an authorized retailer or else warranty will be void.
Memory Compartment
The memory compartment contains a memory slot for additional memory installation. Memory instal-
lation/upgrades must be done by an authorized retailer or else warranty will be void.
Battery Eject
L
The battery is held by a spring lock. The spring loaded latch automatically locks the battery pack when
L
inserted. Moving this to unlock will partially eject the battery pack. Usage details are described in the
battery section later in this manual.
Left/Right Audio Speakers (See Left and Right Sides)
Battery Pack
The battery pack is actually combined with the Notebook PC's surface in order to reduce thickness.
When the battery is released, the surface and battery pack will be seen as a single unit. The battery pack
cannot be further disassembled and must be replaced as a single unit.
Drive Module Eject
L
The module drive eject is used for ejecting a module drive inserted into the Notebook PC.
L
Knowing the Parts
2
17
Advertisement
Table of Contents
