Page 1
Administration guide Océ TDS-TCS-TC Systems Connectivity information for Windows environments...
Page 2
Original instructions that are in British English. Trademarks Océ, Océ ColorWave, Océ PlotWave, Océ TDS are registered trademarks of Océ-Technologies B.V. Océ is a Canon company. Adobe, PostScript are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Contents Contents Chapter 1 Introduction.........................7 History of the document..........................8 Introduction for the reader..........................10 Supported transport and printing protocols....................11 Compatibility tables............................12 Compatibility matrix of the printer drivers.................... 12 Compatibility matrix of the printer controller applications..............15 Physical connections............................16 Network printing architectures........................17 Client/Server configuration........................
Page 4
Contents Upgrade procedure........................... 47 Configure Océ printer controller remote applications on a workstation..........48 Un-install Océ printer controller remote applications................51 IPv6 support..............................52 Printer compatibility with IPv6........................52 IPv6 for Océ TDS/TCS/TC4 systems .......................53 Chapter 3 Print via LPD/LPR......................55 Printer server configuration in a Client/Server architecture............... 56 Introduction to Printer Server configuration..................
Page 5
Contents Chapter 6 Simple Network Management Protocol (SNMP)............111 Introduction to SNMP..........................112 SNMP specifications and compatibility......................113 Description of the SNMP settings on the Océ printers controller............114 Information retrieved through SNMP from the Océ compatible systems..........116 Chapter 7 Troubleshooting......................117 Océ printer controller remote applications troubleshooting..............118 No connection: the message field is empty..................118 No connection: the message field displays 'System initialising...'............120 No connection: the message field shows 'Trying to connect...'............
Page 6
Contents Océ TDS/TCS/TC Connectivity information for Windows environments...
History of the document History of the document Introduction The table below lists the history of the Océ Connectivity Manual for Microsoft Windows from its version 2012-10. Version Topic What's new? 2018-05 Document structure New organization of the Connectivity Manual. This manual is now dedicated to TDS/TCS/TC on- Operating systems Removal of Windows Vista and Windows Server...
Page 9
History of the document Version Topic What's new? 2013-08 Printers Support of new printers: • Océ PlotWave 340/360 • Océ PlotWave 750 Support of new printer versions: • Océ ColorWave 650 R3 • Océ PlotWave 900 R2 2013-04 Operating system Support of Windows 8 and Windows Server 2012 Printer drivers Support of Océ...
Introduction for the reader Introduction for the reader Introduction The Océ TDS/TCS/TC Connectivity information for Windows environments manual applies to the next environments: • Windows Server 2008 R2 • Windows 7 • Windows 8 • Windows Server 2012 • Windows 8.1 •...
Supported transport and printing protocols Supported transport and printing protocols The Océ Wide Format Printing Systems support the following transport and printing protocols: Océ system Transport protocols Printing protocols Océ TCS (all) • TCP/IP • LPD Océ TDS (all) • IPX/SPX •...
Compatibility tables Compatibility tables Compatibility matrix of the printer drivers Supported drivers You can use the Océ WPD2, WPD (not recommended) or PS3 printer driver with the Océ TDS and TCS printers. Use the next compatibility tables to know which printer driver to install: •...
Page 13
Compatibility matrix of the printer drivers Printer Windows 8 / 8.1 / 10 Remark Full support of Windows 8.1 from WPD2 v2.9 and PS3 1.23 Full support of Windows 10 from WPD2 v2.12 and PS3 1.26 Océ TDS320 WPD2 (from 2.9) PS3 (from 1.22) Océ...
Page 14
Compatibility matrix of the printer drivers Printer Windows Server 2012 / Server 2012 R2 (64-bit operating systems) Remark Full support of Windows Server 2012 R2 from WPD2 v2.9 and PS3 1.23 Océ TCS400 PS3 (from 1.22) WPD2 (from 2.9) Océ TCS500 PS3 (from 1.22) PS3 (from 1.22) Océ...
Compatibility matrix of the printer controller applications Compatibility matrix of the printer controller applications Introduction The remote application software allows the configuration and the management of the printer controller. Depending on the printer model, the printer controller is accessible: • from a remote application software (Océ Remote Logic or Océ Power Logic Remote), •...
Physical connections Physical connections With the Océ TDS/TCS systems, the following network boards are available: • Standard: Ethernet (UTP) 10Mb/s, 100Mb/s and 1Gb/s with RJ45 connector Chapter 1 - Introduction Océ TDS/TCS/TC Connectivity information for Windows environments...
Network printing architectures Network printing architectures Client/Server configuration Definition In this configuration, the printing resources administration is centralised. The client workstation is connected to a Print Server linked to the print system (controller). Recommended for large scale LANs. Illustration Attributes Explanation of the above scheme: •...
Peer to peer configuration Peer to peer configuration Definition In this configuration, the client workstation is directly connected to the print system (controller). Recommended for small LANs. Illustration Attributes Explanation of the above scheme: • (1) is the method to apply for the printer driver installation (see the User Manual of the printer drivers).
Configure the TCP/IP settings Configure the TCP/IP settings Configure the TCP/IP settings of the print system controller Introduction The procedures described in this section explain how to edit the TCP/IP settings of the Océ Wide Format printing systems: • at network integration after the first installation (only for Océ TCS300). •...
Configure the TCP/IP settings: prepare the configuration for a first installation Configure the TCP/IP settings: prepare the configuration for a first installation Before you begin IMPORTANT The preparation of the configuration is only described for the Océ TCS300. For the other Océ TDS/TCS systems, contact your Océ representative if needed. An Océ technician must prepare the configuration.
Check the type of TCP/IP network Check the type of TCP/IP network Procedure 1. You must know if the network where the Océ printing system is to be integrated uses fixed IP addresses or a DHCP reservation system. If the network uses Then fixed IP address to configure the TCP/IP settings of your printing system, see:...
Get to know the type of TCP/IP network Get to know the type of TCP/IP network When to do The next procedure applies to the Océ TCS300. Procedure 1. Get an IP address assigned by DHCP. To do so, refer to the procedure in the next table. How to get the IP address with the Printer Control Panel (Océ...
Configure the TCP/IP settings: automatic network configuration by DHCP Configure the TCP/IP settings: automatic network configuration by DHCP Introduction Your network type requires a configuration of the print system by DHCP. Refer to the next table in order to locate the procedure that applies to your printing system. Reference If your printer is an Then refer to this procedure...
Page 25
Configure the TCP/IP settings (Océ TCS300 ): automatic network configuration by DHCP Step Action Configure the TCP/IP (IPv4) settings as follows: • make sure that ‘IP type’, when this setting is available, is set to ‘IPv4’ • make sure that 'DHCP' is enabled •...
Configure the TCP/IP settings in a network configuration by DHCP (Océ TDS/TCS systems -except TCS300) Configure the TCP/IP settings in a network configuration by DHCP (Océ TDS/TCS systems -except TCS300) Introduction The procedures given below apply to the following user interfaces: •...
Page 27
Configure the TCP/IP settings in a network configuration by DHCP (Océ TDS/TCS systems -except TCS300) Step Océ TDS/TCS systems Océ TDS7x0 system Configure the TCP/IP (IPv4) settings as follows: • make sure that 'Adapter 1' is enabled • enable 'DHCP' •...
Manual network configuration with a fixed IP address Manual network configuration with a fixed IP address Introduction Your network type requires a manual configuration of the print system with a fixed IP address. Refer to the next table in order to locate the procedure that applies to your printing system. Reference If your printer is an Then refer to the procedure...
Page 29
Configure the TCP/IP settings (Océ TCS300 systems): manual network configuration with a fixed IP-address Finalise the configuration of the TCP/IP settings with the help of Océ Express WebTools Procedure Step Action Type the IP address of the Océ printer in an internet browser. Océ...
Configure the TCP/IP settings in a network configuration with a fixed IP-address (Océ TDS/TCS systems -except TCS300) Configure the TCP/IP settings in a network configuration with a fixed IP- address (Océ TDS/TCS systems -except TCS300) Introduction The procedures given below apply to the following user interfaces: •...
Page 31
Configure the TCP/IP settings in a network configuration with a fixed IP-address (Océ TDS/TCS systems -except TCS300) Procedure Step Océ TDS/TCS systems Océ TDS7x0 system Click the 'System' icon. Click the 'Configuration' link. Expand the following folders: Click ‘Edit’ on ‘TCP/IP (IPv4)’ section. •...
Page 32
Configure the TCP/IP settings in a network configuration with a fixed IP-address (Océ TDS/TCS systems -except TCS300) Step Océ TDS/TCS systems Océ TDS7x0 system Define the hostname. NOTE Make sure the hostname is unique within the network. Click 'Apply' to save the settings. Click 'OK' to save the settings.
Enable print protocols Enable print protocols Enable LPD/LPR protocol Before you begin • You MUST be logged on as a system administrator. • The LPD/LPR protocol is enabled by default on the Océ Wide-format printing systems. Make sure it is enabled on your printing system. Enable LPD protocol for Océ...
Enable LPR/LPD protocol for Océ TDS7x0 Enable LPR/LPD protocol for Océ TDS7x0 Procedure 1. Open the ‘Configuration’ menu and select the ‘Network’ tab. 2. Scroll down to ‘LPD’ section and click ‘Edit’. 3. Select ‘Enabled’ (in ‘Enable LPD’). 4. Click ‘OK’. You are proposed to restart the controller.
Enable LPR/LPD protocol for Océ TCS300 Enable LPR/LPD protocol for Océ TCS300 Procedure 1. From a client workstation, open a web browser and access the Océ Express WebTools: http://<IP-ADDRESS> http://<printer HOSTNAME> 2. In the ‘Configuration’ tab, select ‘Network’ (or 'Connectivity'). 3.
Enable FTP protocol Enable FTP protocol Before you begin • You MUST be logged on as a system administrator. • The FTP protocol is enabled by default on the Océ Wide-format printing systems. Make sure it is enabled on your printing system. Enable FTP protocol for Océ...
Enable FTP protocol for Océ TDS7x0 Enable FTP protocol for Océ TDS7x0 Procedure 1. Open the ‘Configuration’ menu and select the ‘Network’ tab. 2. Scroll down to ‘FTP’ section and click ‘Edit’. 3. Select ‘YES’ (in ‘Enable FTP’) and click ‘OK’. You are proposed to restart the controller.
Enable FTP protocol for Océ TCS300 Enable FTP protocol for Océ TCS300 Procedure 1. From a client workstation, open a web browser and access the Océ Express WebTools: http://<IP-ADDRESS> http://<printer HOSTNAME> 2. In the ‘Configuration’ tab, select ‘Network’ (or 'Connectivity'). 3.
Enable SMB protocol Enable SMB protocol Introduction IMPORTANT The following information and procedures do not address all the Océ TDS/TCS systems. Indeed, the SMB settings configuration is not applicable to the Océ TCS500 v1.2 and higher, Océ TCS300, Océ TDS7x0 and Océ TDS450 v3.1 and higher. This section presents the list of the SMB functionalities, and the procedures to configure the SMB settings.
Page 40
Enable SMB printing protocol 3. Select ‘Enabled’ on the right panel (‘Enable SMB’). 4. Then, go to the 'Workgroup name' setting. 5. Type in the new workgroup name in the input field. NOTE This field is mandatory once the SMB printing protocol is enabled. You must fill it in, otherwise the controller will continuously restart.
Set up the SMB workgroup name Set up the SMB workgroup name Procedure Switch the Océ Settings Editor in SA Mode on page 128. 2. Select ‘Connectivity’ - 'SMB' - 'Workgroup name' 3. Type in the new workgroup name in the input field. NOTE This field is mandatory once the SMB printing protocol is enabled.
Configure Océ printer controller remote applications Configure Océ printer controller remote applications Introduction and prerequisites for the configuration of the Océ printer controller remote applications (Océ TDS/TCS systems - except Océ TCS300) Introduction to printer controller remote applications The Océ TDS/TCS system can be configured locally or remotely. •...
Configure the Océ TDS/TCS system (except TDS7x0) for use with Océ Remote Logic Configure the Océ TDS/TCS system (except TDS7x0) for use with Océ Remote Logic NOTE The procedures below only apply for Océ TDS/TCS systems equipped with a Graphical User Interface.
Configure the Océ TDS7x0 system for use with Océ Power Logic Remote Configure the Océ TDS7x0 system for use with Océ Power Logic Remote Illustration [2] Océ TDS7x0 system configuration for use with Océ Power Logic Remote NOTE The procedure for the Océ TDS7x0 system also applies to the Océ TC4 system. Procedure 1.
Page 45
Configure the Océ TDS7x0 system for use with Océ Power Logic Remote NOTE Always use the drop down list. Never fill in the ‘Host name’ field manually, in order to prevent typing mistakes. NOTE Make sure that the selected parameter (Océ TDS/TCS system hostname or IP address) is permanent.
Install or upgrade Océ printer controller remote applications Install or upgrade Océ printer controller remote applications Installation procedure Procedure 1. Launch the installation files: Then you downloaded the files 1. From Windows Explorer, browse to the directory where the Océ Remote Logic or Océ Power Logic Re- mote distribution is stored.
Upgrade procedure Upgrade procedure Procedure 1. Launch the installation files: Then you downloaded the files 1. From Windows Explorer, browse to the directory where the Océ Remote Logic or Océ Power Logic Re- mote distribution is stored. 2. Double-click ‘ADT_RemoteLogic_vXXX.exe'. (XXX stands for the version number) the files are on the CD Insert the Océ...
Configure Océ printer controller remote applications on a workstation Configure Océ printer controller remote applications on a workstation Before you begin • Make sure you already performed: • the configuration of your print system for use with the remote application, •...
Page 49
Configure Océ printer controller remote applications on a workstation Step Action Illustration / Remark Click 'OK'. The ‘Connect’ window opens again. NOTE If it does not contain the hostname or IP address you have just entered, select it from the drop down list. Click 'OK'.
Page 50
Configure Océ printer controller remote applications on a workstation Step Action Illustration / Remark Make sure that the ‘Host name’ field is empty or 'Auto detected'. If not, open the drop down list and select the empty line or 'Auto detec- ted'.
Un-install Océ printer controller remote applications Un-install Océ printer controller remote applications 1. Remove the controller remote application from the list of programmes: Windows OS Action Windows 7 1. From the Windows ‘Start’ menu, select 'Control Panel' - 'Pro- grams' - 'Uninstall a program'. 2.
IPv6 support IPv6 support Printer compatibility with IPv6 Introduction The following printing system supports the IPv6 implementation as described in this section. Océ TCS/TDS printing systems • Océ TDS450 3.7.1 and higher • Océ TDS700 1.8.2 and higher • Océ TDS750 1.2.2 and higher •...
IPv6 for Océ TDS/TCS/TC4 systems IPv6 for Océ TDS/TCS/TC4 systems Introduction The IPv6 implementation described in this section applies to the following Océ print systems: • Océ TDS450 Océ TDS7x0 • Océ TCS300 Océ TCS500 • Océ TC4 Find below a description of this implementation: •...
Page 54
IPv6 for Océ TDS/TCS/TC4 systems • The SNMP agent (for system supporting it) is not supported on IPv6. • Scan-to-File via SMB is not supported on IPv6. • NetBIOS over TCP/IP is not supported on IPv6. • The IPv6 configuration is not accessible from the Printer Local Panel. •...
Printer server configuration in a Client/Server architecture Printer server configuration in a Client/Server architecture Introduction to Printer Server configuration The two following sections describe how to setup an Océ TDS/TCS Print Server and an associated workstation, in a Client/Server configuration. In this configuration, printer data are sent twice on the network: •...
About the print port About the print port Introduction The print port is used to send data from your Print Server (or workstation) to the printer controller. It is represented by the printer driver. The printer driver is the tool you concretely use to communicate with the printer controller (usually, from an application).
Prepare the print server Prepare the print server Before you begin Make sure the driver you are about to install can be combined with your printer and operating Compatibility matrix of the printer drivers on page system (see 12). NOTE We recommend to use Océ...
2. Install the printer driver on the print server 2. Install the printer driver on the print server Procedure If you want to install Then see Install Océ WPD/WPD2 on the print server on the Océ WPD/Océ WPD2 printer driver page 61 Install Océ...
Caution concerning the printer names Caution concerning the printer names When to do If you are installing the Océ printer driver on a Windows platform: • The printer name may include up to a maximum of 220 characters. • Do not use special characters ([!], [,], [/]). Chapter 3 - Print via LPD/LPR Océ...
Install WPD/WPD2 on the print server Install WPD/WPD2 on the print server NOTE The next procedures apply to both Windows printer drivers: Océ WPD and Océ WPD2. In that case, the generic name 'WPD' is used to refer to both printer drivers. 1.
2. Select the installation mode 2. Select the installation mode Procedure 1. Launch the [Installation Wizard] (double-click on the executable file: <driver>.exe). NOTE In Windows 8 and 10 and Windows Server 2012, launch the [Installation Wizard] from the Desktop view. 2.
3. Connect to the printer model 3. Connect to the printer model Procedure 1. The [Installation Wizard] searches for connected printers: Then your printer is detectable The setup automatically detects your printer. Printer discovery with Océ (see: Select it from the list to confirm. WPD/WPD2 on page [3] Detected printers no printer is detected...
4. Install the printer driver: [Express installation] 4. Install the printer driver: [Express installation] NOTE In a Client/Server architecture, one of the goal is to share the main resources like printers and printer drivers. In the below installation procedures, share the printer driver. In the step 2, select 'Yes'. Procedure 1.
Page 65
4. Install the printer driver: [Express installation] [6] Finish the installation NOTE A shortcut [Uninstall] is created in the 'Start' menu of your Windows workstation ('Start' - '(All) Programs' - 'Oce' - 'Oce WPD/WPD2'). From the 'Start' menu you can also access additional resources (the user manual and animated PDF files).
4. Install the printer driver: [Custom installation] 4. Install the printer driver: [Custom installation] Procedure 1. The Océ Connect Assistant is launched. It connects to the printer controller in order to retrieve the printer model and the printer information. When detected, the printer model is displayed. Else, select your printer model from the list. NOTE When you select the printer model from the list, there is no back-channel performed during the installation.
Page 67
4. Install the printer driver: [Custom installation] 2. Prepare the installation: Step Action Illustration Type a name for the new Caution con- printer (see cerning the printer names on page 60). Check 'Yes' when you are requested to share the printer driver.
Page 68
4. Install the printer driver: [Custom installation] [11] Define the printer options - Océ WPD2 v2.x NOTE A shortcut [Uninstall] is created in the 'Start' menu of your Windows workstation ('Start' - '(All) Programs' - 'Oce' - 'Oce WPD/WPD2'). From the 'Start' menu you can also access additional resources (the user manual and animated PDF files).
Install WPD2 for package awareness Install WPD2 for package awareness When to do Use this procedure in case of a Windows error message related to a package-aware driver. For "https:// more details about the Microsoft Patch MS16-087 (from July 12, 2016) see: support.microsoft.com/en-us/kb/3170005"...
Install Océ PS3 on the print server Install Océ PS3 on the print server 1. Prepare the print server and the installation files Make sure you are ready to configure the print server. Prepare the print server - Get the installation files on page 58 See: Chapter 3 - Print via LPD/LPR Océ...
2. Install the printer driver 2. Install the printer driver Procedure 1. Launch the [Installation Wizard]. (In the Windows Explorer, browse to find the directory where the Océ PostScript 3 distribution is located and double-click ‘Setup.exe’.) 2. Select the setup language if requested. The installer is launched.
Page 72
2. Install the printer driver Then the printer is connected to the net- fill in the host name or the IP address of the printer. work, but it is not detected, • If the printer IP address is not supposed to be changed, use it in preference (Fixed IP address or DHCP reservation).
Page 73
2. Install the printer driver Then the printer is not connected to the select the printer model. network, The Océ Connect Assistant selects the appropriate print- ing port. NOTE As your printer is not connected to a network, the Océ Connect Assistant defines a 'FILE' printing port.
Page 74
2. Install the printer driver 6. Name the printer and click ‘Next’. 7. In the ‘Sharing’ window, click ‘Yes’ to share the printer and define a share name. Check the box for additional drivers if you need to connect the print server with several workstations running under different operating systems (e.g., Windows 64-bits).
Client configuration in a Client/server architecture (all systems) Client configuration in a Client/server architecture (all systems) Introduction to the Client configuration This section describes the client workstation setup to use the Océ printer resource on a network via the TCP/IP protocol. The detailed installation process of each Océ...
Deploy the printer driver in a Client workstation Deploy the printer driver in a Client workstation Introduction This section describes the procedure to install a printer on a client workstation. Before you begin Before you start, make sure the driver you are about to install can be combined with your printer Compatibility matrix on page and operating system (see 12).
Page 77
Install a printer on client workstation running on a Windows operating system 5. Select ‘Select a shared printer by name’ and enter the printer share name. You can also click ‘Browse…’, then double click the print server and the printer. Click ‘Next’.
Print from AutoCAD® on the Client workstation Print from AutoCAD® on the Client workstation Introduction The next procedures apply to both Windows printer drivers: Océ WPD and Océ WPD2. In that case, the generic name 'WPD' is used to refer to both printer drivers. From AutoCAD applications, you can connect to the Océ...
Page 79
Print from AutoCAD® on the Client workstation 5. Enter a new plotter name (to distinguish it from the default name of the system plotter associated with WPD driver) and click ‘Next’. 6. Click ‘Edit plotter configuration’. 7. Select ‘Custom Properties’ in the list and The ‘Access Custom Dialog’...
Peer to peer configuration Peer to peer configuration Prepare the workstation Before you begin Make sure the driver you are about to install can be combined with your printer and operating Compatibility matrix on page system (see NOTE We recommend to use Océ WPD2 with the Océ TDS/TCS systems. 1.
2. Install the printer driver on the workstation 2. Install the printer driver on the workstation Procedure If you want to install Then see Install Océ WPD/WPD2 on the workstation on the Océ WPD/WPD2 printer driver page 83 Install Océ PS3 on the workstation on the Océ...
Caution concerning the printer names Caution concerning the printer names If you are installing the Océ printer driver on a Windows platform: 1. The printer name may include up to a maximum of 220 characters. 2. Do not use special characters ([!], [,], [/]). Chapter 3 - Print via LPD/LPR Océ...
Install WPD/WPD2 on the workstation Install WPD/WPD2 on the workstation Introduction The next procedures apply to both Windows printer drivers: Océ WPD and Océ WPD2. In that case, the generic name 'WPD' is used to refer to both printer drivers. 1.
2. Select the installation mode 2. Select the installation mode Procedure 1. Launch the [Installation Wizard] (double-click on the executable file: <driver>.exe). 2. Select your language and click [Install]. NOTE [Unpack files] enables to save the installation files that compose the printer driver. It does not save the [Installation Wizard] for a future use.
3. Connect to the printer model 3. Connect to the printer model Procedure 1. The [Installation Wizard] searches for connected printers: Then your printer is detectable The setup automatically detects your printer. Printer discovery with WPD/ (see: Select it from the list to confirm. WPD2 on page [13] Detected printers no printer is detected...
4. Install the printer driver: [Express installation] 4. Install the printer driver: [Express installation] NOTE In a Peer to peer architecture, do not share the printer driver on a workstation. In the step 2 of the below procedures, select 'No'. Procedure 1.
Page 87
4. Install the printer driver: [Express installation] [16] Finish the installation NOTE A shortcut [Uninstall] is created in the 'Start' menu of your Windows workstation ('Start' - '(All) Programs' - 'Oce' - 'Oce WPD/WPD2'). From the 'Start' menu you can also access additional resources (the user manual and animated PDF files).
4. Install the printer driver: [Custom installation] 4. Install the printer driver: [Custom installation] Procedure 1. The Océ Connect Assistant is launched. It connects to the printer controller in order to retrieve the printer model and the printer information. When detected, the printer model is displayed. Else, select your printer model from the list. NOTE When you select the printer model from the list, there is no back-channel performed during the installation.
Page 89
4. Install the printer driver: [Custom installation] 2. Prepare the installation: Step Action Illustration Type a name for the new Caution con- printer (see cerning the printer names on page 82). Check 'No' when you are requested to share the printer driver.
Page 90
4. Install the printer driver: [Custom installation] [21] Define the printer options - Océ WPD2 v2.x NOTE A shortcut [Uninstall] is created in the 'Start' menu of your Windows workstation ('Start' - '(All) Programs' - 'Oce' - 'Oce WPD/WPD2'). From the 'Start' menu you can also access additional resources (the user manual and animated PDF files).
Install Océ PS3 on the workstation Install Océ PS3 on the workstation 1. Prepare the workstation and the installation files Make sure you are ready to configure the workstation. Prepare the workstation - Get the installation files on page 80 See: Chapter 3 - Print via LPD/LPR Océ...
2. Install the printer driver 2. Install the printer driver Procedure 1. Launch the [Installation Wizard]. (In the Windows Explorer, browse to find the directory where the Océ PostScript 3 distribution is located and double-click ‘Setup.exe’.) 2. Select the setup language if requested. The installer is launched.
Page 93
2. Install the printer driver Then the printer is connected to the net- fill in the host name or the IP address of the printer. work, but it is not detected, • If the printer IP address is not supposed to be changed, use it in preference (Fixed IP address or DHCP reservation).
Page 94
2. Install the printer driver Then the printer is not connected to the select the printer model. network, The Océ Connect Assistant selects the appropriate print- ing port. NOTE As your printer is not connected to a network, the Océ Connect Assistant defines a 'FILE' printing port.
Page 95
2. Install the printer driver 6. Name the printer and click ‘Next’. 7. In the ‘Sharing’ window, click ‘No’: do not share a printer driver on a workstation in a peer-to-peer configuration. 8. Click ‘Next’. Files are copied on your system. A summary screen appears.
Print from AutoCAD® on the workstation Print from AutoCAD® on the workstation Introduction The next procedures apply to both Windows printer drivers: Océ WPD and Océ WPD2.In that case, the generic name 'WPD' is used to refer to both printer drivers. NOTE Make sure you installed the latest version of WPD (available from the Downloads website: "http://downloads.oce.com"...
Print using a DOS command line interface Print using a DOS command line interface Procedure 1. Launch MS-DOS Command Prompt. 2. Type the command ftp followed by the Océ TDS/TCS hostname or IP address. For example: ftp tds600-gx260 or ftp 134.188.21.179 3.
Print using a browser Print using a browser Procedure 1. Launch the Windows Explorer. 2. Type the FTP address of your Océ TDS/TCS printer. For example 'ftp://134.188.139.23' or 'ftp://TDS800'. 3. Explore 'jobs' folder. 4. Copy the data file(s) you want to submit into the window of the Windows Explorer (e.g. drag-and- drop the data file(s) from another session of the Windows Explorer).
Page 100
Print using a browser Chapter 4 - Print via FTP Océ TDS/TCS/TC Connectivity information for Windows environments...
Prerequisites for printing in a failover cluster configuration Prerequisites for printing in a failover cluster configuration Introduction The next section introduces the prerequisites in order to install a WPD2 printer driver in a failover cluster. In such a configuration, the client workstation is connected to a print server that is installed in a failover cluster environment.
Install the printer driver on each node Install the printer driver on each node Introduction Install the printer driver on each node before you install the printer driver on the cluster. Before you begin Get the installation files on page Get the WPD2 printer driver installation files.
Page 104
Install the printer driver on each node 4. Give a name to the printer. IMPORTANT The name of the printer must be the same on all nodes. Chapter 5 - Print via WPD2 on a Failover Cluster Océ TDS/TCS/TC Connectivity information for Windows environments...
Page 105
Install the printer driver on each node 5. Share the printer and give a share name. NOTE The share name must be the same name for all nodes. The share name will be the same for the printer name you will define on the print server cluster.
Install the printer driver and the printer on the print server cluster Install the printer driver and the printer on the print server cluster Introduction Follow the next illustrated procedure in order to install both, the printer driver and the printer, on the print server cluster.
Page 107
Install the printer driver and the printer on the print server cluster 2. Add the printer with the failover cluster manager. Chapter 5 - Print via WPD2 on a Failover Cluster Océ TDS/TCS/TC Connectivity information for Windows environments...
Page 108
Install the printer driver and the printer on the print server cluster 3. Give the same name as the share name declared on each node. Result The printer driver is now installed on the print server cluster. NOTE From the Printing Preferences of the printer driver, verify the configuration of the regional settings and the page sizes.
Install the printer on a workstation Install the printer on a workstation Before you begin The printer driver is installed on each node. The printer driver and the printer are installed on the print server cluster. Procedure 1. From a client workstation, access the print server cluster by specifying its address. For instance: \\cluster2008r2ps 2.
Page 110
Install the printer on a workstation Chapter 5 - Print via WPD2 on a Failover Cluster Océ TDS/TCS/TC Connectivity information for Windows environments...
Introduction to SNMP Introduction to SNMP This chapter describes the information you can retrieve via SNMP protocol, and the way to retrieve it. However, for a complete reference about the SNMP protocol within our products, refer to the dedicated documentation: Océ Wave Interface SNMP. This document is available from your local Océ...
SNMP specifications and compatibility SNMP specifications and compatibility Introduction IMPORTANT The SNMP section only applies to the Océ TDS printers listed below. It is possible to retrieve information by means of SNMP protocol on: • Océ TDS 450 v3.1 and higher •...
Description of the SNMP settings on the Océ printers controller Description of the SNMP settings on the Océ printers controller Introduction NOTE You MUST be logged on as a system administrator to access them. • On the Océ TDS450 and the Océ TDS750 controller, the SNMP parameters are accessible through the Océ...
Page 115
Description of the SNMP settings on the Océ printers controller The SNMP application ‘Read community’ name must match at least one of the three Océ community names. This is a requirement to access the SNMP OIDs of the Océ TDS450 and the Océ...
Information retrieved through SNMP from the Océ compatible systems Information retrieved through SNMP from the Océ compatible systems The example below only describes the information retrieved through SNMP from an Océ TDS450 system. SNMP enables you to retrieve the same information from: •...
Océ printer controller remote applications troubleshooting Océ printer controller remote applications troubleshooting No connection: the message field is empty Symptom It is impossible to connect to Océ Remote Logic or Océ Power Logic Remote. The message field is empty. The Océ Remote Logic or Océ Power Logic Remote you see is as follows. [24] Empty message field Cause Make sure that the hostname of the Remote Logic server matches with the hostname of the Océ...
Page 119
No connection: the message field is empty Step Action Change the 'startport' value to 16661. You can also increase the 'nrofports' value. NOTE A high value for 'nrofports' can influence the performance Océ Remote Log- ic or Océ Power Logic Remote. [25] Example of a modified 'configuration.adt' file Save and close the 'configuration.adt' or 'ADT.cfg' file.
No connection: the message field displays 'System initialising...' No connection: the message field displays 'System initialising...' Symptom It is impossible to connect. There is a message showing 'System initialising...' and nothing happens. The Océ Remote Logic or Océ Power Logic Remote you see is as follows. [26] 'System initialising...' message Cause Several causes are possible.
Page 121
No connection: the message field displays 'System initialising...' Step Action Change the 'startport' value to 16661. You can also increase the 'nrofports' value. NOTE A high value for 'nrofports' can influence the performance Océ Remote Log- ic or Océ Power Logic Remote. [27] Example of a modified 'configuration.adt' file Save and close the 'configuration.adt' or 'ADT.cfg' file.
No connection: the message field shows 'Trying to connect...' No connection: the message field shows 'Trying to connect...' Symptom It is impossible to connect. The message is 'Impossible to connect to the server. Trying to connect...'. But nothing happens. The Océ Remote Logic or Océ Power Logic Remote you see is as follows. Diagnose Use the below table to make some checks.
Page 123
No connection: the message field shows 'Trying to connect...' Check Action Try to "ping" Océ TDS/TCS system from the workstation: • Open a command prompt. • Type the command line: ping <IP address of the printing system>. • If it is impossible to reach the printing system, then there is a problem in the net- work environment.
Issue with IP address/hostname and Océ Remote Logic Issue with IP address/hostname and Océ Remote Logic Symptom The IP addresses or hostnames of the Océ TDS/TCS system disappear every time Océ Remote Logic 12.11 is restarted. Cause In case of a new installation of Océ Remote Logic 12.11, the file ‘Adt.cfg’ has ‘Read-only’ attribute. But this file contains the IP addresses and/or hostname of the Océ...
Page 125
Issue with IP address/hostname and Océ Remote Logic 6. Repeat step 2 to 5 for all copies of the file ‘ADT.cfg’. Chapter 7 - Troubleshooting Océ TDS/TCS/TC Connectivity information for Windows environments...
Océ Power Logic Remote locks up when switching to another TDS7x0 or TC4 system Océ Power Logic Remote locks up when switching to another TDS7x0 or TC4 system Symptom Océ Power Logic Remote 1.9 or earlier version running under Windows 7 (64-bit) locks up when switching to another TDS7x0 or TC4 system.
Switch the Océ Settings Editor in SA Mode Switch the Océ Settings Editor in SA Mode Introduction This section describes how to switch the ‘Océ Settings Editor’ application in System Administrator mode. Procedure 1. Once the controller is started, select the ‘Océ Settings Editor’ window. 2.
Page 129
Switch the Océ Settings Editor in SA Mode 6. Click ‘System’ (left hand side of the window). You are now able to modify the ‘Connectivity ’ parameters by selecting the ‘Connectivity’ folder in the tree. Chapter 8 - Appendix A - Océ TDS/TCS systems: basic procedures Océ...
Reboot the controller Reboot the controller Introduction You modify ‘Connectivity’ parameters. Each time you click ‘Apply’ in the ‘Océ Settings Editor’, a warning message appears. It informs you that you must reboot the controller to activate the changes. Click ‘OK’ and continue to modify the settings, or reboot the controller once all setup is done. Reboot the controller Procedure 1.
'Safety Guide' . Support For support information please contact your Canon local representative. Find your local contact for support from: "http://www.canon.com/support/" Chapter 9 - Appendix B - You and Océ...
Reader's comment sheet Reader's comment sheet Questions Have you found this manual to be accurate? O Yes O No Were you able to operate the product, after reading this manual? O Yes O No Does this manual provide sufficient background information? O Yes O No Is the format of this manual convenient in size, readability and arrangement (page layout, chapter...
Page 134
Reader's comment sheet Name: Occupation: Company: Phone: Address: City: Country: Please return this sheet to: Océ-Technologies B.V. For the attention of ITC User Documentation. P.O. Box 101, 5900 MA Venlo The Netherlands Send your comments by E-mail to: itc-userdoc@oce.com For the addresses of local Océ organisations see: http://www.oce.com Chapter 9 - Appendix B - You and Océ...
Page 138
Canon Inc. www.canon.com Canon U.S.A., Inc. www.usa.canon.com Canon Canada Inc. www.canon.ca Canon Europe Ltd www.canon-europe.com Canon Latin America Inc. www.cla.canon.com Océ Australia Pty Ltd www.oce.com.au Canon China Co., Ltd www.canon.com.cn Canon Singapore Pte. Ltd www.canon.com.sg Canon Hongkong Co., Ltd www.canon.com.hk...