An Error Message Is Displayed While Using The Photo Viewer - Canon i475D Series Printing Manual
Desktop photo printer
Hide thumbs
Also See for i475D Series:
- Quick start manual (70 pages) ,
- Printing manual (4 pages) ,
- Setup instructions (2 pages)
Table of Contents
Advertisement
Troubleshooting
An Error Message is Displayed While Using the Photo
Viewer
If one of the following messages appears while using the Photo Viewer, printing may be disabled
or the Photo Viewer may be terminated forcibly.
Error Massage
Executing maintenance.
Insert a memory card.
The printer's card slot has been write-
enabled. ......
There is a problem with the memory
card or it is not. ......
Insufficient disk space. ......
Insufficient memory. ......
A digital camera is connected to the
printer. ......
Failed to communicate with the
printer. ......
Failed to print. ......
An internal error (code = nnnn)
occurred. ......
(n: Alphanumeric character)
42
Printing cannot be done in the maintenance mode.
After completion of maintenance, pressing the Maintenance button allows you to
exit the maintenance mode.
Insert a memory card after checking its orientation.
See "Using a Memory Card" on page 8.
If a memory card has already been inserted, remove it and then insert it again.
Next, check that the indicator lamp stays on.
The memory card utility started on the computer has write-enabled the card slot.
When the card slot is write-enabled, the printer cannot print images.
When you have finished writing data to the card, cancel the write-enable mode.
For the cancellation procedure, see "Setting up the Card Slot as the Memory Card
Drive of the Computer" on page 23.
• The memory card is inserted incorrectly.
Insert the memory card after checking its orientation. See "Using a Memory
Card" on page 8.
If a memory card has already been inserted, remove it and then insert it again.
Next, check that the indicator lamp stays on.
• The memory card cannot be read.
Image data edited/processed on the computer must also be printed from the
computer.
The hard disk of the computer does not have sufficient free space.
Delete unnecessary files on the hard disk to create sufficient free space, then
start the Photo Viewer again.
The computer does not have sufficient memory.
Close some applications or increase virtual memory, then start the Photo Viewer
again.
Printing from a computer or the operation panel cannot be done when a digital
camera or digital video camcorder is connected to the printer.
After completion of operation from the digital camera, disconnect the connection
cable.
The computer cannot communicate with the printer.
Check whether the cable is connected securely between the printer and
computer.
Turn the printer off and on again, then start the Photo Viewer again.
An unexpected error occurred during printing.
Turn the printer off and on again.
An internal error occurred.
Turn the printer off and on again, then start the Photo Viewer again.
If the same error persists, reboot the computer and then start the Photo Viewer
again.
Try This
Advertisement
Chapters
Table of Contents
