Table of Contents
Advertisement
Selecting a supported display mode
The display mode of the monitor uses is controlled by the computer. Therefore, refer
to your computer documentation on how to change display modes.
The image size, position and shape might be changed when the display mode
changes. This is normal and the image can be re-adjusted using automatic image
setup and the image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to
reattach the CRT monitor temporarily until you have re-configured the system;
preferably to 1920 x 1080 at 60 Hz, which is a common display mode.
The display modes shown below have been optimized at the factory.
Table 2-2. Factory set display modes
Timing
640x350
640x480
720x400
800x600
1024X768
1152x864
1280x1024
1440x900
1680X1050
1920x1080
Refresh rate(Hz)
70Hz
60Hz,72Hz,75Hz
70 Hz
60Hz,72Hz,75Hz
60Hz,70Hz,75Hz
75Hz
60Hz,72Hz,75Hz
60Hz
60Hz
60Hz
2-7
Chapter 2.
Advertisement
Table of Contents
