Removing The Rails And Rack Adapters; Figure 1-7. Removing The System From The Rack - Dell 4200 Installation Manual
Dell poweredge 4200 servers: installation guide
Hide thumbs
Also See for 4200:
- Installation and troubleshooting manual (154 pages) ,
- User manual (132 pages) ,
- Solution manual (114 pages)
Table of Contents
Advertisement
support.dell.com
interior slide
Figure 1-7. Removing the System From the Rack
Removing the Rails and Rack Adapters
To remove the rails and rack adapters from the system, perform these steps.
WARNING: The system weighs approximately 50 kilograms (kg)
(110 pounds [lb]) when fully loaded. To prevent personal injury, do not
attempt to move the system by yourself.
1.
Remove the three rails on each side of the system (see Figure 1-8).
Remove each rail by removing the four 10-32 x 0.25-inch Phillips-head screws that
secure the rail to the system chassis.
Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide
thumbscrews (4)
green push button
1-9
Advertisement
Table of Contents
