Canon imagePROGRAF GP-4000 Online Manual page 286

Hide thumbs Also See for imagePROGRAF GP-4000:

Table of Contents

By flicking the touch screen, you can check various settings of wireless direct.

Connecting Smartphone/Tablet to Printer

1. Turn on wireless communication on your device.

Enable "Wi-Fi" on your device's "Setting" menu.

For more on turning on wireless communication, see your device's instruction manual.

2. Select "DIRECT-XXXX-GP-NNNN" ("X" represents alphanumeric characters, NNNN

means your printer model name.) from list displayed on device.

• If "DIRECT-XXXX-GP-NNNN" does not appear on the list, wireless direct is not enabled.

Changing Printer Setting

3. Enter password.

Your device is connected to the printer.

• Check the password for the wireless direct.

1. Flick HOME screen and tap

2. Tap Wireless Direct.

3. Tap Show password.

• Depending on the device you are using, entering the password is required to connect a

device to the printer via Wi-Fi connection. Enter the password specified for the printer.

• If your Wi-Fi Direct compatible device is set to prioritize using Wi-Fi Direct and it is connecting

to the printer, the printer displays a confirmation screen asking if you allow the device to

connect to the printer.

Make sure the name on the touch screen is the same as that of your wireless communication

device and tap Yes.

Changing Direct Connection Setting

Change the settings for the wireless direct following the procedure below.

Make sure printer is turned on.

2. Flick HOME screen and tap

Home Screen Menu Composition

to enable wireless direct.

LAN settings.

Troubleshooting