Figure 33. Installing the fan cage
Next steps
1. Follow the procedure listed in
Removing the fan tray
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3.
Remove the air
shroud.
4.
Remove the fan
cage.
5. If installed,
remove the expansion card
6. If applicable, lift the PEM by using the PEM handle until the PEM is in an upright position.
7. Release the backplane and fan power cables from the cable clips on the fan tray and disconnect the power cables from the
connectors on the system board.
Steps
1. Press the blue release tabs on the side of the fan tray to unlock the tray.
2. Holding the fan tray lift the tray out of the system.
44
Installing and removing system components
After working inside your system
Safety instructions
Before working inside your system
risers.
on page 30.
on page 29.
on page 30.