Sanyo KS2462R Instruction Manual page 11
Sanyo split system air conditioner instruction manual ks2462r
Hide thumbs
Also See for KS2462R:
- Submittal sheet (3 pages) ,
- Technical data & service manual (58 pages) ,
- Installation instructions manual (32 pages)
Table of Contents
Advertisement
Mounting the Remote
Control Unit
When attaching to wall
When using the remote
control unit
Securing the remote
control unit to prevent theft
OI-508-11EG
Using the Remote Control Unit (continued)
Truss-head
tapping screws
5/32 x 5/8 " (4 x 16 mm)
(supplied)
Remote
control
unit holder
1) Confirm the indoor unit beeps when the ON/OFF button is pressed at the
wall location where the remote control unit is to be attached, then attach
the holder to the wall.
2) When taking out the remote control unit, pull it from the holder.
Point the transmitter on the remote control unit at the sensor on the
•
indoor unit when operating the remote control unit and the air conditioner.
Do not place objects which may block the transmitted signals between
•
the receiver and the remote control unit.
Truss-head
tapping screws
5/32 x 5/8 " (4 x 16 mm)
(supplied)
Remote
control
unit holder
1) Attach the holder to the wall with one screw in the upper hole only.
2) Remove the cover from the remote control unit, and then remove the
batteries. Next, place the remote control unit in the holder.
3) Secure both the remote control unit and the holder to the wall with another
screw through the lower hole.
4) Put the batteries back in the remote control unit, and then replace the
cover.
Press
Hook
Holder
11
Hide quick links:
Advertisement
Table of Contents
