Touchpad; Removing The Touchpad - Dell P157G Service Manual
Hide thumbs
Also See for P157G:
- Service manual (68 pages) ,
- Setup and specifications (23 pages) ,
- Setup and specifications (23 pages)
Table of Contents
Advertisement
2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.
3. Connect the speaker cable to the connector on the system board.
4. Adhere the tape that secures the speaker cable to the palm-rest and keyboard assembly.
5. Connect the touchpad cable to the system board and close the latch.
6. Connect the keyboard cable to the system board and close the latch.
7. Connect the keyboard-backlight cable to the system board and close the latch.
8. Place the antenna cables back into place and adhere the tapes that secure them to the palm-rest and keyboard assembly.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
Touchpad
Removing the touchpad
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
About this task
The following image(s) indicate the location of the touchpad and provides a visual representation of the removal procedure.
Steps
1. Open the latch and disconnect the touchpad cable from the touchpad.
2. Remove the three screws (M1.6x2) that secure the touchpad bracket to the palm-rest and keyboard assembly.
3. Lift the touchpad bracket off the palm-rest and keyboard assembly.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
43
- Quick Links:
- Major Components of Inspiron 14 5420
Hide quick links:
Advertisement
Table of Contents
