Table of Contents
Advertisement
Steps
1. Place the network-port bracket on the I/O board.
2. Align the screw holes on the network-port bracket to the screw holes on the I/O board.
3. Replace the two (M2x5) screws that secure the network-port bracket to the I/O board.
Next steps
1. Install the
base
cover.
2. Exit
Service
Mode.
3. Follow the procedure in
I/O board
Removing the I/O board
Prerequisites
1. Follow the procedure in
2. Enter
Service
Mode.
3. Remove the
base
cover.
4. Remove the
network-port
About this task
The following images indicate the location of the I/O board and provide a visual representation of the removal procedure.
42
Removing and installing components
After working inside your
Before working inside your
bracket.
computer.
computer.
Hide quick links:
Advertisement
Table of Contents
