Table of Contents
Advertisement
System BIOS
You can use the System BIOS screen to edit specific functions such as boot order, system password, setup password, set the SATA and
PCIe NVMe RAID mode, and enable or disable USB ports.
Related link
System BIOS Settings details
System Information
Memory Settings
Processor Settings
SATA Settings
Boot Settings
Network Settings
Integrated Devices
Serial Communication
System Profile Settings
System Security
Redundant OS Control
Miscellaneous Settings
iDRAC Settings utility
Device Settings
Viewing System BIOS
Viewing System BIOS
To view the System BIOS screen, perform the following steps:
1
Turn on, or restart your system.
2
Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3
On the System Setup Main Menu screen, click System BIOS.
System BIOS Settings details
The System BIOS Settings screen details are explained as follows:
Option
Description
System Information Specifies information about the system such as the system model name, BIOS version, and Service Tag.
Memory Settings
Specifies information and options related to the installed memory.
Processor Settings
Specifies information and options related to the processor such as speed and cache size.
SATA Settings
Specifies options to enable or disable the integrated SATA controller and ports.
NVMe Settings
Specifies options to change the NVMe settings. If the system contains the NVMe drives that you want to
configure in a RAID array, you must set both this field and the Embedded SATA field on the SATA Settings menu
to RAID mode. You might also need to change the Boot Mode setting to UEFI. Otherwise, you should set this field
to Non-RAID mode.
Installation and Service Manual
Pre-operating system management applications
37
- Quick Links:
- Dell Emc Poweredge T440 Overview
Hide quick links:
Advertisement
Table of Contents
