Table of Contents
Advertisement
Steps
1
Disconnect all the power cables from the power supply unit (PSU) .
2
Remove the screw securing the PSU to the chassis and slide the PSU out of the PSU cage.
Figure 75. Removing a cabled PSU
Next steps
1
Install a cabled PSU.
2
Follow the procedure listed in
Related links
Installing a cabled power supply unit
Installing a cabled power supply unit
Prerequisites
1
Follow the safety guidelines listed in
2
Unpack the replacement power supply unit (PSU).
Steps
1
Slide the new PSU into the PSU cage until the PSU is fully seated.
2
Tighten the screw to secure the PSU to the chassis.
3
Connect all the power cables from the PSU to the system board, drive backplane, and drives.
After working inside your
system.
Safety
instructions.
Installation and Service Manual
Installing and removing system components
127
Advertisement
Table of Contents
