Table of Contents
Advertisement
Next steps
1.
Install the air
shroud.
2. Follow the procedure that is listed in
Drives
Removing a drive blank
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure listed in
3.
Remove the front
bezel.
CAUTION:
To maintain proper system cooling, drive blanks must be installed in all empty drive slots.
CAUTION:
Mixing drive blanks from previous generations of PowerEdge servers is not supported.
Steps
Press the release button, and slide the drive blank out of the drive slot.
Figure 22. Removing a drive blank
Next steps
1.
Install the drive
or
replace the drive
Installing a drive blank
Prerequisites
1. Follow the safety guidelines listed in
2. Follow the procedure in
3.
Remove the front
bezel.
CAUTION:
To maintain proper system cooling, drive blanks must be installed in all empty drive slots.
CAUTION:
Mixing drive blanks from previous generations of PowerEdge servers is not supported.
Steps
Slide the drive blank into the drive slot until the release button clicks into place.
38
Installing and removing system components
After working inside your
Safety
instructions.
Before working inside your
blank.
Safety
instructions.
Before working inside your
system.
system.
system.
Advertisement
Table of Contents
