Table of Contents
Advertisement
Figure 25. Installing a drive carrier
Next steps
Install the front
bezel.
Removing the drive from the drive carrier
Prerequisites
1. Follow the safety guidelines listed in
2.
Remove the front
bezel.
3.
Remove the drive
carrier.
Steps
1. Using a Phillips 1 screwdriver, remove the screws from the slide rails on the drive carrier.
NOTE:
If the hard drive or SSD carrier has Torx screw, use Torx 6 (for 2.5-inch drive) or Torx 8 (for 3.5-inch drive)
screw driver to remove the drive.
2. Lift the drive out of the drive carrier.
Safety
instructions.
Installing and removing system components
41
Advertisement
Table of Contents
