Table of Contents
Advertisement
Figure 28. Removing a 3.5-inch drive adapter from a 3.5-inch drive carrier
Next steps
Replace a 3.5-inch adapter into a 3.5-inch drive
Installing a 3.5-inch adapter into a 3.5-inch drive carrier
Prerequisites
1. Follow the safety guidelines listed in
2.
Remove the drive
carrier.
Steps
1. Insert the 3.5 inch drive adapter into the drive carrier with the connector end of the drive toward the rear of the drive
carrier.
2. Align the screw holes on the drive and drive adapter with the holes on the drive carrier.
3. Install the screws to secure the drive to the drive carrier.
NOTE:
If the 3.5-inch drive has Torx screw, use Torx 6 screwdriver to install the drive to a 3.5-inch drive adapter.
44
Installing and removing system components
carrier.
Safety
instructions.
Advertisement
Table of Contents
