Table of Contents
Advertisement
Figure 66. Removing the BOSS S2 module
Next steps
1.
Replace the BOSS S2 module
Installing the BOSS S2 module
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove the front
bezel.
4.
Remove the BOSS S2 module
5. Disconnect the BOSS S2 power and signal cable from the module and system board.
Steps
1. Align and slide the BOSS S2 module into BOSS S2 module cage and secure it with a screw using the Phillips 1 screwdriver.
78
Installing and removing system components
or
Install the BOSS S2 module
Safety
instructions.
Before working inside your
blank.
blank.
system.
Advertisement
Table of Contents
