Table of Contents
Advertisement
Figure 71. Removing the IDSDM module
Next steps
Replace the IDSDM
module.
Installing the IDSDM module
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3.
Remove the air
shroud.
Steps
1. Locate the IDSDM connector on the system board.
To locate IDSDM, see the
2. Align IDSDM module with the connector on the system board.
3. Push IDSDM module until it is firmly seated in the connector on the system board.
82
Installing and removing system components
Safety
instructions.
Before working inside your
System board jumpers and connectors
system.
section.
Advertisement
Table of Contents
