Table of Contents
Advertisement
14. Replace the memory module(s) (see
15. Replace the optical drive (see
16. Replace the hard drive (see
17. Replace the main battery (see
NOTICE:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in
damage to the computer.
18. Turn the computer over and turn it on.
NOTE:
If you use a BIOS update program CD to flash the BIOS, press <F12> before inserting the CD so that you can set up the computer to boot from a
CD this one time only. Otherwise, you must enter the system setup program to change the default boot order.
19. Insert the flash BIOS update program CD that accompanied the replacement system board into the optical drive. Follow the instructions that appear on
the screen. See
Flashing the BIOS
20. Enter the system setup program to update the BIOS on the new system board with the computer Service Tag.
Back to Contents Page
Replacing the Memory
Module(s)).
Replacing an Optical
Drive).
Replacing the Hard
Drive).
Before Working Inside Your
Computer).
for further information.
Advertisement
Table of Contents
