Table of Contents
Advertisement
Figure 90. Configuration 14: 16 x 2.5-inch NVMe RAID with fPERC (H965i)
NOTE:
Follow the sequential order as shown in the table to remove the cables, to install the cables follow the reverse
sequential order.
Table 93. 16 x 2.5-inch NVMe RAID with fPERC (H965i)
Order
1
2
3
4
5
6
7
8
9
10
From
SL1_CPU2_PB1 (signal connector on system board) CTRL_DST_PA1 (fPERC input
SL2_CPU2_PA1 (signal connector on system
board)
SIG_PWR_1 (system board power connector)
CTRL_SRC_PB1 (fPERC controller connector)
CTRL_SRC_PA1 (fPERC controller connector)
SL3_CPU1_PA2 (signal connector on system
board)
SL4_CPU1_PB2 (signal connector on system
board)
SIG_PWR_2 (system board power connector)
CTRL_SRC_PB1 (fPERC controller connector)
CTRL_SRC_PA1 (fPERC controller connector)
To
connector)
CTRL_DST_PB1 (fPERC input
connector)
BP_PWR_1 (backplane power
connector)
BP_DST_PA2 (backplane signal
connector) and BP_DST_PB2
(backplane signal connector)
BP_DST_PA1 (backplane signal
connector) and BP_DST_PB1 (backplane
signal connector)
CTRL_DST_PA1 (fPERC input
connector)
CTRL_DST_PB1 (fPERC input
connector)
BP_PWR_1 (backplane power
connector)
BP_DST_PA2 (backplane signal
connector) and BP_DST_PB2
(backplane signal connector)
BP_DST_PA1 (backplane signal
connector) and BP_DST_PB1 (backplane
signal connector)
Installing and removing system components
137
Hide quick links:
Advertisement
Table of Contents
