hit counter script

Canon IX-R7000 Operation Manual page 75

Hide thumbs Also See for IX-R7000:
Table of Contents

Advertisement

Error message
Film Empty
Film Type
Film Wind up
Remove Film
Cause and solution
The transfer film has been used up.
Replace the transfer film, and press the SET key.
→See "Changing the Ink Ribbon and Transfer Film" on page 13 for details about
changing the transfer film.
The transfer film could not be detected correctly.
Reload the transfer film, and press the SET key.
→See "Changing the Ink Ribbon and Transfer Film" on page 13 for details about
changing the transfer film.
The transfer film set in the printer and printer settings may be different.
→See "Ink Ribbon/Transfer Film" on page 84 about the supported types of
transfer film.
→See "Setting the Type of Ink Ribbon or Transfer Film to Use" on page 40 for
details on how to set the transfer film type.
transfer film not supported by this printer cannot be used.
→See "Ink Ribbon/Transfer Film" on page 84 for types of supported transfer film.
The transfer film may be cut.
Repair the cut transfer film, and press the SET key.
→See "If the Ink Ribbon or Transfer Film are Cut" on page 76 for instructions on
how to repair a cut transfer film.
The transfer film could not be wound up.
Reload the transfer film, and press the SET key.
→See "Changing the Ink Ribbon and Transfer Film" on page 13 for details about
changing the transfer film.
The transfer film may be cut.
Repair the cut transfer film, and press the SET key.
→See "If the Ink Ribbon or Transfer Film are Cut" on page 76 for instructions on
how to repair a cut transfer film.
The transfer film set in the printer and printer settings may be
different.
→See "Ink Ribbon/Transfer Film" on page 84 about the supported types of
transfer film.
→See "Setting the Type of Ink Ribbon or Transfer Film to Use" on page 40 for
details on how to set the transfer film type.
The transfer film is set in the transfer film cassette when
performing cleaning with a cleaning card.
Remove the transfer film from the transfer film cassette, and reload the
transfer film cassette. Press the SET key.
Troubleshooting
70

Advertisement

Table of Contents
loading

Table of Contents