Speakers; Removing The Speakers - Dell Latitude 3440 Service Manual

Hide thumbs Also See for Latitude 3440:

Table of Contents

Steps

1. Align and place the touchpad module into the slot on the palm-rest and keyboard assembly.

2. Align the screw holes on the touchpad module to the screw holes on the palm-rest and keyboard assembly.

3. Replace the six screws (M2x2) to secure the touchpad module to the palm-rest and keyboard assembly.

4. Connect the keyboard backlight-cable to the connector on the touchpad module. .

5. Connect the keyboard-cable to the connector on the touchpad module close the latch.

6. Connect the touchpad cable to the connector on the system board and close the latch.

Next steps

1. Install the

base

cover.

2. Follow the procedure in

Speakers

Prerequisites

1. Follow the procedure in

2. Remove the

base

cover.

3. Remove the battery.

4. Remove the

wireless

card.

About this task

The following images indicate the location of the speakers and provide a visual representation of the removal procedure.

After working inside your

Before working inside your

computer.

Removing and installing components

Table of Contents

P169g