Table of Contents
Advertisement
Chapter 5
5.3.2.32 Setting of Stop-less Stacking
Execute this adjustment to eliminate paper wrinkle.
Adjusting method is as follows:
1) Turn ON the power of the finisher.
2) Turn ON the power switch of the host machine to be on standby.
3) Open the front door and put the door switch tool into the door switch [1].
4) Remove the screw [2] to remove the switch cover [1].
[1]
[2]
5) Set DIP SW382 [1] on the switch PCB as shown in the figure below.
[1]
SW382
SW381
SW383
SW384 SW385
(-)
(+)
5-48
[1]
F-5-222
F-5-223
ENTER
F-5-224
6) Press switch SW385 [1] so that this adjustment is ready now.
0021-1765
SW382
SW381
7) Press push switch SW384 [1] to execute setting.
- 0: normal
- 1: not used
- 2: no press (when using thin paper)
- 3: no intermittent feeding
8) Press switch SW385 [1] again to complete this adjustment.
SW382
SW381
SW383
SW384 SW385
(-)
(+)
ENTER
[1]
F-5-225
SW383
SW384 SW385
(-)
(+)
ENTER
[1]
F-5-226
Advertisement
Table of Contents
