Item
Connector
39
A10, A6, A2, A9, A5, A1
40
J_FAN2U_3
41
J_BP1
42
J_FAN2U_2
43
A3, A7, A11, A4, A8, A12
44
J_FAN2U_1
45
J_CTRL_PNL
46
CPU 1
47
J_FP_USB
48
Tera2 host card
Disabling a forgotten password
The software security features of the system include a system password and a setup password. The password jumper enables
these password features or disables them and clears any password(s) currently in use.
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
Steps
1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
2. Remove the system cover.
3. Move the jumper on the system board jumper from pins 4 and 6 to pins 2 and 4.
4. Install the system cover.
The existing passwords are not disabled (erased) until the system boots with the jumper on pins 2 and 4. However, before
you assign a new system and/or setup password, you must move the jumper back to pins 4 and 6.
NOTE:
If you assign a new system and/or setup password with the jumper on pins 2 and 4, the system disables the new
password(s) the next time it boots.
5. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
6. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet.
7. Remove the system cover.
8. Move the jumper on the system board jumper from pins 2 and 4 to pins 4 and 6.
9. Install the system cover.
10. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
11. Assign a new system and/or setup password.
98
Jumpers and connectors
Description
Memory module sockets
Cooling fan connector
Backplane power connector
Cooling fan connector
Memory module sockets
Cooling fan connector
Control panel signal connector
Processor 1
Front-panel USB connector
Power connector