Table of Contents
Advertisement
Removing the power switch
1
Follow the procedure in
2
Remove the:
a
cover
b
front bezel
c
hard drive assembly
d
optical drive
e
power supply unit
3
To remove the power switch:
a
Disconnect the power switch cable from the system board [1].
b Press the power switch retention tabs and remove it from the chassis [2] [3].
Installing the power switch
1
Slide the power switch module into the slot on the chassis until it clicks into place.
2
Connect the power switch cable to the connector on the system board.
3
Install the:
a
power supply unit
b
optical drive
c
hard drive assembly
d
front bezel
e
cover
4
Follow the procedure in
Removing the SD card reader
1
Follow the procedure in
2
Remove the:
a
cover
b
front bezel
c
hard drive assembly
d
optical drive
e
power supply unit
3
To remove the SD card reader:
a
Remove the power supply unit cables from the retention clips on the SD card reader enclosure [1].
Before Working Inside Your
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
Computer.
Removing and installing components
19
Advertisement
Table of Contents
